Tag Archives: Legacy Miniatures

LEGACY MINIATURES, Isabeau

CoolMiniOrNot has updated the product page for the Legacy Miniatures Nobles of Cadwallon box set with a photo of the correct version of the included Isabeau.

CONFRONTATION, Phoenix Edition

Confrontation is coming back.  The announcement was made at the Game Manufacturers Association‘s (GAMA) trade show, currently being held in Las Vegas.  The game and all associated products will be licensed by Cyanide Studio, produced by Legacy Miniatures (a division of Dust Studio), and distributed by Cool Mini or Not.

I haven’t seen a huge response to this news yet, and it’s too early to tell how successful this venture will be.  So far my impression is that people are either extremely excited about this announcement or somewhat indifferent.  I never played the game initially, and don’t predict that I’ll start with this new edition.  That’s not because the game doesn’t appeal to me; I just don’t have the time at this stage in my life (maybe again one day).  Consequently, I’m in the indifferent camp.

I’ve also had more than my fill of Confrontation products.  I became a Rackham devotee back in 2003, and have a nearly complete collection (all in storage, sadly).  That being said, I picked up most of the Legacy sets that were released in the past months, and might purchase a few bits and bobbles this year if tempted enough.  I’ll even get the rulebook, assuming they hire a writer worth their salt to edit the volume (someone with a thorough knowledge of composition, grammar, style, and punctuation).  That purchase will be mainly for the art and photos, however, and to satiate my incessant appetite for books.

Some of the most informative tidbits on this incarnation of Confrontation were in a QA with David Preti of Dust/Legacy posted by Almanro on the DragonPainting forum.  I’ve posted this below (with some edits):

Q: Is it a new edition of the C3 manual with the integration of the C3.5 rules?
A: It starts from version 3 and 3.5 with a complete review and refresh

Q: Are there changes (improvements) to C3.5 rules, or will they remain the same as we know?
A: I think there will be changes

Q: If the previous is “yes”, is there the opportunity to propose changes or the project is already closed and tested?
A: The project is not closed and is being tested

Q: Is a print hard copy version planned or only the pdf will be offered on-line? If a hard copy version is planned, which will be the languages?
A: A hard copy of the manual will be available in English and French.

Q: Do you think to re-release all the Confrontation miniature range?
A: No. Of course the miniatures that are too old won’t be re-released

Q: Will there be new miniatures no longer in “limited edition”?
A: There will certain be new miniatures, but not immediately. Be patient!

Q: Will be the cards modified to improve the game dynamics?
A: Yes

Q: What is the expected timing?
A: At Gama previews will be shown of what you will see from now to 6-9 months

Q: Metal or plastic or resin?
A: Resin and Metal

Q: Possible costs?
A: In line with other miniature games (certainly not Legacy prices! Which will remain for the moment for the next few waves)

Q: Is there the possibility to create an official tournament circuit supported by the brand?
A: Yes

LEGACY MINIATURES, Viens voir les miliciens

Haekel & Jaeckel has a great article comparing the recently released (and now sold out) box set of Cadwallon militia from Legacy Miniatures.

The article is in French, but a little wizardry from Google Translate produces sufficient results for non-Francophones.

LEGACY MINIATURES, Production Changes Coming

A week ago a representative from Legacy Miniatures posted a comment to a news item on Tabletop Gaming News about their latest batch of releases.  Posts on TGN get buried pretty quickly, as news is uploaded to the site at a steady pace throughout any given day; and since Legacy’s response didn’t appear until the  post was already five days old, it’s very possible many people are still in the dark about what’s in store for the range in the near future.  The response is therefore quoted here in full:

Legacy Miniatures wrote:
November 7, 2011 at 3:55 am

Hi,

I take the opportunity to explain and answers to some of the complains I read in these last months.
First of all thanks for posting them, we were expecting them and it is important for us to read and react.
As David from CMON said things are not always black and white.
I will explain where we come from and why we acted in a certain way and not in another:

CMON has no responsibilities on the pricing, we sell them the waves at a certain price and of course they charge their profit margin. So no need to attack them, they are just doing their job.
We are located in China, finding a trustworthy resin caster is very difficult and we found a solution that is still too expensive. For you and for us. We are now in the process to reconsider the whole process.
We wanted to provide an impeccable product in term of quality; this is the reason why a resin mould is used only for few casts (5 to 8 depending on the piece) and why we inserted a plastic tray. We understood now that these solutions are too expensive so from future waves we will change this approach. We also work the miniatures with a system of integrated plugs and this is also an additional cost.
We collected all the resins masters left by Rackham and we found them in a very chaotic status. Some pieces are missing; some others incomplete and we have to archive and catalogue in a proper manner. This is time consuming and we are not that many at Legacy Miniatures.
After wave 2 and wave 3 we understood there is no reason to re-release existing products. We will limit the release to new pieces or to limited edition ones.
When we will have finally sorted out the catalogue, we will sit down with our distribution partner CMON and we will decide what is the best way to relaunch the game. Again it is not an easy call because it is a huge investment and we have to do in the right way.
These pieces now on sale will never be recasted in this manner and quality, hence customers who bought them could be sure of the uniqueness of their acquisition.
The Cynwall Dragon will be sold at what we consider the right market price after we looked into similar pieces. No doubt, it will be expensive, but again we don’t think we will be able to produce many of them.

Thanks to all of you for your patience, critics and we hope that we will be able in the future months to fulfil your expectations.
Again if you have to blame someone it is us.

Regards

Legacy Miniatures

I have my own opinion about the Legacy project, and will save sharing my thoughts on the range for a later date.  In the meantime, I want to address the “revelation” that Legacy resin models are made in China, and the surprise many customers expressed upon learning this.

Legacy Miniatures is owned and operated by Dust Game Ltd, the makers of Dust Tactics.  I’m not sure how the corporate structuring works, but Dust Game Ltd is directly tied to an older company, Dust Models, which makes a variety of products based on the Dust universe, including comics books, scale models, modeling guides, etc.  Both Dust Models and Dust Game are the brainchild of none other than Paolo Parente, who, as director, oversees Dust Studio, the creative team that brings the Dust world to life.  Paolo, and much of his team, were central players at Rackham, so it’s no surprise that they were able to secure licensing agreements with Cyanide Studios (owners of the Rackham IP) and CoolMiniOrNot (distributors) to bring the Legacy Miniatures project to fruition.

Legacy Miniatures manufactures their resin models in China (Hong Kong), because Dust Studio has been based there for years.  From what I recall, Paolo started Dust as a side project in the early 2000s, but had been kicking around ideas about the universe long before that.  With a foothold already established in China to make plastic model kits for Dust Models, Paolo had the right connections to help his employer (Rackham) make their transition to prepainted plastic: all of the Age of Rag’narok plastic models were made in China, specifically by Cathay Plastic Factory Ltd.

A little known fact–even though it’s written on box!–is that the Rackham Legends models were made in China, too.  If you own any of these models, you know they are of very high quality with little or no flash from the molding process.  My hunch is that for these first releases of Legacy models, Dust Game repeated the manufacturing process used for the Legend models, and may even have commissioned the same manufacturer.

Given the location of their operations, established business connections, targeted production levels, quality concerns, and associated costs (packaging, for example), it was a logical choice for Dust Game to produce their models in China.  Mind you, I’m not here to defend or criticize their decision to operate out of China; I just wanted to provide an explanation as to why.

LEGACY MINIATURES, Flesh Golem Review

LOBO recently published a review and unboxing of the Flesh Golem from Legacy Miniatures on the WAMP website.  He covers all the essential points in his review: packaging, publication, cast quality, resin quality, and overall impression of the model.

If you’re still feeling tempted by this model, but haven’t taken the plunge, LOBO’s review may help with your decision.

At the time of this writing, CMoN still had 100 left (out of a print run of either 200 or 250, I think).  They’re not exactly flying off the shelf, but stock is dwindling.

LEGACY MINIATURES, Now On Sale

The dust has settled after GenCon 2011, and CMoN has announced that for those of you who, like me, could not attend, the first Legacy Miniatures models are now available from their online store.  The Mid-nor Hydra retails for $119.99 and the Flesh Golem $79.99.  As of this writing, there were 127 Hydras and 175 Golems available; these are limited edition models.

MID-NOR HYDRA, Unboxing

A member on the DragonPainting.net forum, atacam, has just uploaded several photos of the Mid-Nor Hydra from Legacy Miniatures.  According to atacam, “It goes together beautifully, with little to no trimming on certain parts.”

Rumor has it that the next two models from Legacy are the Mid-Nor cyclops and an Acheron character.

LEGACY MINIATURES, Painted Hydra and Flesh Golem

Mid-Nor Hydra

CoolMiniorNot has just released images of the painted versions of Legacy Miniatures’ Mid-Nor Hydra and Flesh Golem.  Both of these models will be for sale at GenCon 2011 (this weekend) and from the CMoN store thereafter.  They are printed in resin and available on a limited basis.

Flesh Golem

ADMINISTRATIVE, Legacy Miniatures Page

I’ve started a page devoted to Legacy Miniatures releases.  At the moment there is just one entry, the Mid-Nor Hydra, which features photos of the original sculpt and all of the preview images of the final product that have been made public to date.

I’ll add an entry for the flesh golem later today, and others as information and images become available.  If you catch something before I do, by all means, please let me know.

I apologize for the blurry image at the top of this post (it’s the best I have), but found it fitting for an announcement tied to the Legacy project.  This is concept art for the Kelt living legend model on aurochs mount, which had a product code and release date at one time, but Rackham, for whatever reason, chose not to release.  I’ve seen pictures of the aurochs sculpt, but not the rider.  I wonder if Legacy will release this model.  <wink-wink, nudge-nudge>

AARKLASH ARCHIVE, Bibliotheca Down

It is with great regret that I have taken down the Bibliotheca section of the Aarklash Archive.  Legacy Miniatures is taking too long to get back to me about this site, and I am no longer comfortable with the content in that section available to the public.  The Bibliotheca was dependent on the assumption that Rackham’s miniatures and Confrontation would remain out of print, but this is no longer the case.

I will continue to work on the Bibliotheca as private pages, just in case Legacy awards UtM the permission to publish some material for archival reasons.

I would like to take this opportunity to note that all of the material on this site was previously available for free from the old Rackham websites and various other places on the Internet.  From the very beginning I limited the scope of my purview to that of compiler, and never intended to abuse any intellectual property rights.  It is in this spirit, to ensure that UtM remains legal, that I’ve taken down the Bibliotheca section.  I should also note, with impending regret, that other sections may follow.

LEGACY MINIATURES, Interview

Beasts of War has just uploaded an interview with Vincent Fontaine of Legacy Miniatures with more details on the coming revival of Confrontation miniatures.